The paint on your lattice fence top is peeling, flaking, and curling \u2014 exposing bare wood to moisture, UV damage, and the harsh Midwest weather. In Burr Ridge, IL, where freeze-thaw cycles, heavy snow, and intense summer sun take a toll on exterior finishes, lattice fence tops are among the most challenging surfaces to keep properly coated. The crisscross pattern traps moisture and makes even application difficult, accelerating finish failure.<\/p>\n
Lattice fence top paint peeling and stain failure are caused by inadequate surface preparation before the original paint job, coating applied over existing loose paint, moisture trapped behind the finish, UV degradation from prolonged sun exposure, and the natural expansion and contraction of wood in temperature swings. In Burr Ridge, the combination of high humidity, heavy snow load on lattice tops, and temperature extremes from -10\u00b0F to 95\u00b0F+ makes finish failure especially common and rapid.<\/p>\n
Call or Text: (708) 475-2454<\/a> Strip all loose and peeling paint down to bare wood. Sand the surface smooth, clean with a TSP solution, and apply a quality exterior primer. Finish with two coats of 100% acrylic exterior paint or a premium oil-based stain. The key is thorough preparation \u2014 painting over loose finish will fail again quickly.<\/p>\n Inadequate preparation.<\/strong> The #1 cause of finish failure. If the lattice was not properly cleaned, sanded, and primed before painting, the finish will not adhere and will peel within a season or two.<\/p>\n Coating over loose paint.<\/strong> Applying new paint over existing peeling or flaking paint traps the loose layer underneath. As the wood expands and contracts, the loose layer separates further, causing the new coat to peel with it.<\/p>\n Moisture entrapment.<\/strong> Lattice’s open pattern traps rain, snow, and condensation. If the wood is not fully dry before painting, moisture gets sealed behind the finish, causing blistering and peeling.<\/p>\n UV degradation.<\/strong> Prolonged sun exposure breaks down paint binders, causing chalking, fading, and eventual flaking. Lattice tops receive direct overhead UV exposure, accelerating this process.<\/p>\n Temperature cycling.<\/strong> Burr Ridge’s extreme temperature swings cause wood to expand and contract repeatedly. This movement stresses the paint film, causing cracks and eventual separation from the wood surface.<\/p>\n Yes, but thorough preparation is critical:<\/p>\n Strip loose paint:<\/strong> Use a paint scraper, wire brush, or chemical paint stripper to remove all peeling and flaking paint. Sand the surface smooth with 80-120 grit sandpaper.<\/p>\n Clean the surface:<\/strong> Wash the lattice with a TSP (trisodium phosphate) solution to remove dirt, mildew, and grease. Rinse thoroughly and allow to dry completely (24-48 hours).<\/p>\n Prime bare wood:<\/strong> Apply a quality exterior oil-based or shellac primer to all bare wood areas. Primer seals the wood and provides a bonding surface for the topcoat.<\/p>\n Paint or stain:<\/strong> Apply two coats of 100% acrylic exterior paint or a premium oil-based stain. Use a brush for the lattice intersections and a small roller for flat surfaces.<\/p>\n When to call a pro:<\/strong> If the lattice has extensive paint failure, if lead paint is present (pre-1978 homes), if the wood is rotted or damaged, or if you want a factory-quality finish that will last 5+ years, professional painting is recommended.<\/p>\n Step 1: Strip all loose paint.<\/strong> Use a paint scraper and wire brush to remove all peeling, flaking, and curling paint. For heavy buildup, apply a chemical paint stripper per manufacturer instructions. Sand the surface smooth with 80-120 grit sandpaper.<\/p>\n Step 2: Clean the lattice.<\/strong> Mix TSP solution per label directions. Scrub the lattice thoroughly, paying attention to the intersections where dirt and mildew accumulate. Rinse with clean water and allow to dry completely (24-48 hours minimum).<\/p>\n Step 3: Repair damaged wood.<\/strong> Replace any rotted or cracked lattice slats. Fill small cracks and holes with exterior wood filler. Sand repairs smooth.<\/p>\n Step 4: Prime bare wood.<\/strong> Apply a coat of exterior oil-based or shellac primer to all bare wood areas. Primer is essential for adhesion and longevity. Allow to dry per manufacturer instructions.<\/p>\n Step 5: Apply first coat of paint or stain.<\/strong> Use a 2-inch brush for the lattice intersections and a small roller for flat surfaces. Apply paint evenly, working in small sections to avoid lap marks. Allow to dry completely.<\/p>\n Step 6: Apply second coat.<\/strong> After the first coat is fully dry, apply a second coat for durability and even color coverage. Two coats are essential for a finish that will withstand Burr Ridge’s harsh weather.<\/p>\n Step 7: Inspect and touch up.<\/strong> After the second coat is dry, inspect the lattice for any missed spots or thin areas. Touch up as needed.<\/p>\n Extreme temperature swings.<\/strong> Burr Ridge experiences temperatures from -10\u00b0F in winter to 95\u00b0F+ in summer. Use paint rated for extreme temperature ranges and apply during moderate weather (50-85\u00b0F).<\/p>\n Heavy snow load.<\/strong> Lattice fence tops accumulate heavy snow in Burr Ridge winters. The weight and moisture accelerate finish failure. Consider a solid top rail or snow guard to reduce snow accumulation on the lattice.<\/p>\n Affluent neighborhood standards.<\/strong> Burr Ridge is an upscale suburb with high property standards. A professionally painted fence maintains curb appeal and property value. Match the paint color to your home’s exterior for a cohesive look.<\/p>\n Call Now: (708) 475-2454<\/a> Lead paint is present.<\/strong> If your fence was painted before 1978, it may contain lead paint. Lead paint removal requires special equipment, training, and disposal procedures. A professional ensures safe, compliant removal.<\/p>\n Extensive paint failure.<\/strong> If the entire lattice top has failed, the preparation work is extensive and time-consuming. A professional can complete the job efficiently with proper equipment and materials.<\/p>\n Wood rot or structural damage.<\/strong> If the lattice has rotted or cracked slats, repair or replacement is needed before painting. A professional can assess and repair the structure, then apply a lasting finish.<\/p>\n You want a lasting result.<\/strong> Professional painting with proper prep, premium materials, and expert application will last 5-10 years, far longer than a typical DIY job.<\/p>\n With proper preparation and quality materials, expect to repaint every 5-7 years. Burr Ridge’s harsh weather may shorten this to 3-5 years for DIY jobs. Professional painting with premium materials lasts 7-10 years.<\/p>\n Yes, if the existing paint is firmly adhered with no peeling, flaking, or chalking. Clean and sand the surface, then apply primer and paint. If any areas are loose, strip them first.<\/p>\n 100% acrylic exterior latex paint is the best choice for most lattice fences. It is flexible, UV-resistant, and breathable. For maximum durability in extreme weather, use a premium oil-based enamel.<\/p>\n Paint provides better protection and UV resistance. Stain shows the wood grain but offers less protection. For lattice tops exposed to heavy weather, paint is the better choice.<\/p>\n Preparation (stripping, sanding, cleaning): 4-8 hours. Painting (two coats): 2-4 hours with drying time between coats. Total project time: 1-2 days depending on size and condition.<\/p>\n No. Paint should be applied when the wood is completely dry and the forecast calls for at least 24 hours of dry weather. High humidity slows drying and can cause finish defects.<\/p>\n If the lattice structure is sound (no rot, cracks, or major damage), repair and repaint is cost-effective. If more than 30% of the lattice is damaged, replacement with new material is more economical.<\/p>\n Phone: (708) 475-2454<\/a> Paint peeling or stain failing on your lattice fence top in Burr Ridge, IL? Learn proper surface preparation, priming, and repainting techniques for a lasting exterior finish that withstands Midwest weather.<\/p>\n","protected":false},"author":4,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1581],"tags":[],"class_list":["post-85623","post","type-post","status-publish","format-standard","hentry","category-home-maintenance-service"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\n\t\t
WhatsApp: Message Us on WhatsApp<\/a>
Find Us: Google Maps<\/a>
Instagram: @handyaleks<\/a> | YouTube: @handyaleks<\/a><\/div>\nQuick Answer: How Do You Fix Paint Peeling on a Lattice Fence Top?<\/h2>\n
Why Paint and Stain Fail on Lattice Fence Tops<\/h2>\n
Can You Repaint a Lattice Fence Top Yourself?<\/h2>\n
Tools and Materials Needed<\/h2>\n
\n
Step-by-Step: Repainting a Lattice Fence Top<\/h2>\n
Burr Ridge-Specific Considerations<\/h2>\n
Don’t let peeling paint ruin your fence’s appearance. Our team strips, preps, primes, and repaints for a finish that lasts 5+ years \u2014 right the first time.<\/p>\n
WhatsApp: Get a Free Estimate<\/a>
Location: View on Google Maps<\/a><\/div>\nWhen to Call a Professional<\/h2>\n
Related Repair Guides<\/h2>\n
\n
Frequently Asked Questions<\/h2>\n
How often should I repaint a lattice fence top?<\/h3>\n
Can I paint over existing good paint?<\/h3>\n
What is the best paint for a lattice fence top?<\/h3>\n
Should I use paint or stain on lattice?<\/h3>\n
How long does it take to repaint a lattice fence top?<\/h3>\n
Can I paint lattice in the rain or humidity?<\/h3>\n
Is it worth repairing old lattice or replacing it?<\/h3>\n
EVO SERVICE is your trusted local handyman for fence painting and repair in Burr Ridge, IL. Fast response, fair pricing, and guaranteed workmanship. Call us today!<\/p>\n
WhatsApp: Send a Message<\/a>
Follow Us: Instagram<\/a> | YouTube<\/a>
Map: Google Maps<\/a><\/div>\n","protected":false},"excerpt":{"rendered":"