You notice the bottom of your alley gate is soft, dark, and crumbling \u2014 the wood has rotted from constant contact with wet soil, standing water, and splashback from rain and snow melt. Bottom rot on alley gates is extremely common in Franklin Park, IL, where the combination of heavy rainfall, snow melt, and gates that sit close to the ground creates ideal conditions for wood decay.<\/p>\n
Gate bottom rot is caused by direct soil contact (the gate bottom touches moist soil, absorbing water), splashback from rain and irrigation (water splashes up onto the gate bottom, keeping it constantly wet), poor drainage around the gate area (standing water soaks the bottom boards from below), and the natural aging of untreated or poorly sealed wood. In Franklin Park’s single-family homes and townhomes, alley gates are often installed with minimal ground clearance \u2014 making the bottom boards especially vulnerable to moisture damage.<\/p>\n
Send a few photos of the rotted area, your address, and the best time for us to stop by. We’ll cut out the rot and restore your gate.<\/p>\n
\ud83d\udcde Call: (708) 475-2454<\/a> | \ud83d\udcac WhatsApp: Request Services<\/a><\/p>\n \ud83d\udccd Find us on Google Maps<\/a> | \ud83d\udcf8 Follow us on Instagram<\/a> | \ud83c\udfac Watch repair videos on YouTube<\/a>\n<\/div>\n Cut out all rotted wood until you reach solid, sound material. Replace the rotted section with a new board (using a Dutchman repair for partial rot or full board replacement for extensive rot). Apply a wood hardener to any marginal areas. Seal the repair with exterior-grade wood filler, primer, and paint. To prevent future rot, raise the gate bottom for more ground clearance, improve drainage around the gate, and apply a waterproof sealant to the bottom edge.<\/p>\n Soil contact.<\/strong> The #1 cause of bottom rot. When the gate bottom touches moist soil, the wood absorbs water like a sponge. Constant moisture exposure leads to fungal growth and wood decay.<\/p>\n Splashback.<\/strong> Rain and snow melt splash up from the ground onto the gate bottom, keeping it wet even when the gate isn’t touching the soil. This is especially problematic in Franklin Park’s heavy rain and snow melt seasons.<\/p>\n Poor drainage.<\/strong> If the ground around the gate doesn’t drain properly, standing water soaks the bottom boards from below. Gates installed in low spots or areas with poor grading are especially vulnerable.<\/p>\n Lack of protective finish.<\/strong> Gates that haven’t been properly sealed or stained lack the moisture barrier needed to protect the bottom boards. Even painted gates can suffer bottom rot if the paint is cracked or missing in the splash zone.<\/p>\n Old wood.<\/strong> Older gates made from untreated or non-durable wood species are more susceptible to rot. Pine gates without pressure treatment are especially vulnerable.<\/p>\n Yes, but the approach depends on the extent of rot:<\/p>\n Localized rot (small area):<\/strong> Cut out the rotted wood, fill with wood hardener and epoxy filler, sand smooth, prime, and paint. This is a manageable DIY repair.<\/p>\n Partial board rot (bottom 6-12 inches):<\/strong> Cut off the rotted section and splice in a new piece of wood (Dutchman repair). Requires basic carpentry skills and tools.<\/p>\n Full board rot (entire bottom board):<\/strong> Remove the rotted board and replace it with a new one. This is a straightforward replacement if you can match the material and finish.<\/p>\n When to call a pro:<\/strong> If the rot has spread to the gate frame, multiple boards are rotted, or the gate’s structural integrity is compromised, professional repair is recommended.<\/p>\n Step 1: Assess the extent of rot.<\/strong> Probe the bottom boards with a screwdriver or awl. Soft, spongy wood that easily penetrates is rotted. Sound wood resists penetration. Map out all rotted areas.<\/p>\n Step 2: Remove the gate (recommended).<\/strong> Take the gate off its hinges and lay it flat on sawhorses. This gives you full access to the bottom boards and makes cutting and replacement much easier.<\/p>\n Step 3: Cut out rotted wood.<\/strong> Using an oscillating multi-tool or handsaw, cut out all rotted wood until you reach solid material. Cut slightly beyond the visible rot to ensure all decayed wood is removed.<\/p>\n Step 4: Treat marginal areas.<\/strong> Apply wood hardener to any areas that are slightly soft but not fully rotted. This stabilizes the wood and prevents the rot from spreading.<\/p>\n Step 5: Install replacement wood.<\/strong> Cut a replacement board to fit the opening. Secure with exterior-grade screws. For full board replacement, remove all fasteners holding the old board and install the new one.<\/p>\n Step 6: Seal and finish.<\/strong> Fill any gaps with exterior wood filler. Sand smooth. Apply primer and 2 coats of exterior paint. Seal the bottom edge with waterproof sealant.<\/p>\n Step 7: Improve drainage and clearance.<\/strong> Grade the ground around the gate to improve drainage. If possible, raise the gate bottom 1-2 inches above the ground to prevent future soil contact.<\/p>\n Heavy rainfall and snow melt.<\/strong> Franklin Park receives significant rainfall and snow melt, creating prolonged wet conditions that accelerate gate bottom rot. Proper drainage and ground clearance are essential for gate longevity.<\/p>\n Flat terrain and poor drainage.<\/strong> Franklin Park’s flat terrain means water doesn’t drain quickly. Gates installed in low spots or areas with poor grading are especially vulnerable to bottom rot from standing water.<\/p>\n Local soil conditions.<\/strong> Franklin Park’s soil retains moisture well, keeping gate bottoms wet for extended periods. This accelerates rot in untreated or poorly sealed wood.<\/p>\n The rot has spread to the gate frame.<\/strong> Frame rot compromises the entire gate’s structural integrity and requires professional carpentry skills to repair.<\/p>\n Multiple boards are rotted.<\/strong> If more than one board is significantly rotted, the gate may have underlying drainage or installation issues that need professional assessment.<\/p>\n The gate’s structural integrity is compromised.<\/strong> If the gate is weak, wobbly, or at risk of collapse, professional repair ensures the gate is safe and functional.<\/p>\n You need material matching.<\/strong> Finding replacement boards that match the existing gate’s species, color, and finish can be challenging. A professional has access to a wider range of materials and finishing techniques.<\/p>\n We repair and replace rotted gate bottoms throughout Franklin Park, IL and surrounding suburbs. Durable repairs with rot-resistant materials and proper sealing.<\/p>\n \ud83d\udcde Call: (708) 475-2454<\/a> | \ud83d\udcac WhatsApp: Message Us<\/a><\/p>\n \ud83d\udcf8 Instagram<\/a> | \ud83c\udfac YouTube<\/a> | \ud83d\udccd Google Maps<\/a>\n<\/div>\n Localized rot repair (epoxy filler) costs $75-$150. Partial board replacement (Dutchman repair) runs $100-$250. Full board replacement costs $150-$300. Frame repair adds $200-$500 or more.<\/p>\n Standard wood filler is not suitable for gate bottom repair \u2014 it will not hold up to moisture and will fail quickly. Use epoxy wood filler specifically designed for exterior, wet-environment applications.<\/p>\n Pressure-treated pine is the best value for gate bottom replacement \u2014 it’s rot-resistant and affordable. Cedar is also excellent but more expensive. Avoid untreated pine or softwoods for gate bottoms.<\/p>\n Raise the gate bottom 1-2 inches above the ground. Improve drainage around the gate area. Apply a waterproof sealant to the bottom edge. Inspect the gate annually and address any moisture issues promptly.<\/p>\n Not necessarily. If only the bottom boards are rotted and the frame is sound, board replacement is more cost-effective than full gate replacement. However, if the rot has spread to the frame or multiple components are damaged, replacement may be the better option.<\/p>\n In Franklin Park’s wet climate, rot can spread several inches per year. A small rotted area today can become a major structural problem next year. Address rot promptly to minimize repair costs.<\/p>\n No. Painting over rot does not stop the decay process. The rot is already inside the wood and will continue to spread. All rotted wood must be removed and replaced before painting.<\/p>\n","protected":false},"excerpt":{"rendered":" Bottom rot on alley gates is a common problem in Franklin Park, IL. Learn how to assess rot extent, cut out decayed wood, install replacement boards, and prevent future rot \u2014 with local considerations for heavy rainfall, flat terrain, and poor drainage.<\/p>\n","protected":false},"author":4,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1581],"tags":[],"class_list":["post-85607","post","type-post","status-publish","format-standard","hentry","category-home-maitenance-service"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\n\t\tQuick Answer: How Do You Fix a Gate Rotted at the Bottom?<\/h2>\n
Why Alley Gates Rot at the Bottom<\/h2>\n
Can You Repair a Rotted Gate Bottom Yourself?<\/h2>\n
Tools and Materials Needed<\/h2>\n
\n
Step-by-Step: Repairing a Rotted Gate Bottom<\/h2>\n
Franklin Park-Specific Gate Rot Considerations<\/h2>\n
When to Call a Professional<\/h2>\n
Related Repair Guides<\/h2>\n
\n
Frequently Asked Questions<\/h2>\n
How much does it cost to repair a rotted gate bottom?<\/h3>\n
Can I use wood filler to repair a rotted gate bottom?<\/h3>\n
What’s the best wood for gate bottom replacement?<\/h3>\n
How can I prevent future gate bottom rot?<\/h3>\n
Should I replace the entire gate if the bottom is rotted?<\/h3>\n
How quickly does rot spread in gate wood?<\/h3>\n
Will painting a rotted gate bottom stop the rot?<\/h3>\n