Need gate repair in Chicago? EVO Home Repair helps with metal entry gates, wood fence gates, pedestrian gates, alley gates, gate hinges, gate latches, gate locks, self-closing gate hardware, gate closer replacement, basic welding repair, wood gate rebuilding, and related minor garage door maintenance for homes, rentals, HOAs, and small commercial properties.
A gate problem is rarely just one part. A gate that will not close may have a bent hinge, loose post, worn latch, weak closer, damaged lock box, sagging frame, broken spring, rusted hardware, or a fence panel pulling out of alignment. For Chicago properties, weather, rust, sidewalk movement, soil movement, repeated use, and rental turnover can all affect how a gate opens, closes, latches, and locks.
This service page focuses on practical gate repair: fixing the parts that keep the gate moving, closing, and working correctly. For garage doors, we handle selected minor repairs and maintenance, but garage door springs, cables, major track problems, and high-tension hardware should be handled by a garage door specialist.
Need a gate repaired or adjusted?
Text photos of the full gate, hinge side, latch side, lock, closer, posts, bottom clearance, and damaged area. For wood gates, include the frame and diagonal brace. For metal gates, include close-ups of the latch box, welds, hinge points, and rusted areas.
Gate Repair Services in Chicago
EVO Home Repair provides gate repair in Chicago for residential and small commercial properties. We work on common entry gates, metal pedestrian gates, fence gates, wood gates, alley gates, latch hardware, lock hardware, hinge issues, gate closers, and damaged gate frames where the repair scope is suitable.
The goal is simple: make the gate open, close, latch, and operate more reliably. Depending on the condition, that may involve adjustment, hardware replacement, reinforcement, welding repair, wood frame repair, hinge correction, closer replacement, or rebuilding a wood gate section.
What Gate Problems We Repair
- Gate will not close
- Gate will not latch
- Gate rubs the post or sidewalk
- Gate is sagging
- Gate latch is damaged
- Gate lock is misaligned
- Gate closer is broken or weak
- Self-closing gate hardware needs replacement
- Gate spring is loose, damaged, or missing
- Metal gate has broken welds
- Metal latch box is damaged
- Gate hinge is bent, loose, or rusted
- Wood fence gate is sagging or twisted
- Wood gate frame needs rebuilding
- Fence gate boards are damaged
- Gate post is loose or out of alignment
- Gate needs new hardware after fence repair
- Gate needs sanding, prep, or paint touch-up after repair
Metal Entry Gate Repair
Metal entry gates are common on Chicago homes, apartment buildings, condo buildings, and small commercial properties. They often fail around the latch box, lock area, hinge side, spring closer, welded joints, or post connection. Rust and repeated force can weaken the metal around the hardware, especially where the gate is used every day.
Metal gate repair may include adjusting the gate, repairing the latch area, replacing hardware, welding small damaged sections where suitable, fabricating a small protective cover, installing or adjusting a gate closer, and repainting exposed metal after the repair.
Welding Repair for Metal Gates
Some metal gate repairs need more than a screwdriver. When a latch box, hinge tab, support bracket, or small metal section breaks loose, welding may be the practical repair method. Welding is useful when the existing metal is still strong enough to accept repair and the gate does not require full replacement.
Welding work is evaluated case by case. If the gate has severe corrosion, a failing structural post, large frame distortion, automatic gate equipment, or code-sensitive access requirements, additional specialist review may be needed.
Gate Closer Replacement and Self-Closing Gate Hardware
A gate closer helps the gate return to the closed position after use. On busy pedestrian gates, rental properties, alley gates, and gates near outdoor areas, a weak or broken closer can leave the gate open, cause latch problems, or make the gate slam. Gate closer repair may include replacing the closer, adjusting spring tension where the hardware allows it, correcting latch alignment, or replacing related brackets.
For pool areas, child-safety areas, HOAs, and commercial properties, self-closing and self-latching requirements may involve code or association rules. EVO Home Repair can install and adjust suitable gate hardware, but does not claim pool-barrier code compliance or inspection approval.
Gate Latch, Lock, and Hardware Repair
Gate latch and lock problems are among the most common reasons people call for gate repair. A latch may stop catching because the gate dropped, the post moved, the hardware loosened, the strike side shifted, or the metal around the latch box became worn. In some cases, the fix is adjustment. In other cases, the damaged area needs reinforcement or replacement hardware.
We can help with basic gate latch repair, lock alignment, handle replacement, latch replacement, strike repair, hinge-side adjustment, and selected metal hardware repairs. Rekeying, lockout service, electronic access control, intercom systems, and alarm-connected gates may require a locksmith or access-control specialist.
Wood Fence Gate Repair and Rebuilding
Wood fence gates fail differently than metal gates. A wood gate may sag because the frame is weak, the diagonal brace is missing or installed in the wrong direction, hinge screws are pulling out, boards are loose, or the post has shifted. A gate can look mostly intact but still drag, bind, or refuse to latch.
Wood gate repair may include rebuilding the frame, adding or correcting diagonal bracing, replacing damaged boards, replacing hinges, correcting latch alignment, trimming the bottom clearance, reinforcing the post side, or building a new gate panel to fit the existing fence opening.
Gate Repair Process
1. Photo Review
The first step is usually a photo review. Useful photos include the full gate from both sides, hinge side, latch side, lock area, closer, spring, bottom clearance, post connection, damaged metal or wood, and the surrounding fence or wall.
2. Identify the Real Cause
A gate that does not latch may not need a new lock. The actual cause may be a sagging hinge, shifted post, broken weld, weak closer, bent frame, loose wood gate brace, or sidewalk clearance issue. The repair should target the cause, not just the visible symptom.
3. Repair, Reinforce, or Replace Hardware
Depending on the gate condition, the work may include hinge repair, latch replacement, lock alignment, welding repair, bracket fabrication, closer replacement, spring hardware adjustment, wood frame repair, board replacement, or gate rebuild.
4. Test Operation
After the repair, the gate should be tested for opening, closing, latch alignment, lock operation, closer movement, clearance, and rubbing. If a closer is installed, the gate should return toward the closed position without slamming or stopping too early, depending on the hardware type.
Gate dragging, not latching, or not closing?
Send close-up photos of the hinges, latch, closer, post, and damaged frame. For wood gates, send the back side of the gate so the frame and diagonal brace are visible.
Related Minor Garage Door Work
Garage doors should not be treated the same as fence gates. They have springs, cables, rollers, tracks, openers, sensors, and high-tension parts. For safety, garage door spring repair, cable replacement, major track repair, off-track doors, broken torsion springs, and opener motor troubleshooting should be handled by a garage door specialist.
EVO Home Repair can help with selected minor garage door work when the scope is suitable, such as garage door weather stripping, bottom seal replacement, small trim repair around the garage opening, minor opener bracket support, wall button replacement where wiring is already safe and accessible, and basic visual inspection of loose non-tension hardware.
When Gate Repair Makes Sense
Gate repair makes sense when the main frame and posts are still usable and the problem is isolated to hinges, latch alignment, lock hardware, closer hardware, a small welded bracket, a wood brace, or a damaged section of the gate. Repair is often practical for rental properties, entry gates, backyard gates, alley gates, and HOA maintenance work.
When Gate Replacement May Be Better
Replacement may be better when the gate is severely rusted, twisted, rotten, structurally weak, too narrow or too wide for the opening, repeatedly failing after previous repairs, or no longer matches the way the property is used. Wood gates with weak framing and metal gates with major corrosion may cost more to patch repeatedly than to rebuild properly.
When Additional Review May Be Needed
Additional review may be needed for automatic gates, powered gate operators, intercom systems, access-control wiring, electric locks, alarm-connected gates, pool-barrier requirements, commercial code requirements, structural posts, masonry changes, retaining walls, property line questions, underground utilities, and any gate that may affect required egress.
For garage doors, high-tension springs, cables, drums, off-track doors, major opener problems, and unsafe movement should be handled by a garage door specialist. For electrical wiring, new circuits, unsafe wiring, or powered gate/operator issues, a licensed electrician or gate specialist may be needed.
Chicago Service Area
EVO Home Repair serves Chicago and nearby areas within an approximately 15-mile service area. Gate repair requests commonly come from homeowners, landlords, property managers, HOAs, condo owners, and small commercial properties.
Service area examples include Avondale, Irving Park, Portage Park, Jefferson Park, Logan Square, Albany Park, Lincoln Square, Lakeview, Lincoln Park, Wicker Park, Bucktown, West Town, Ukrainian Village, North Center, Roscoe Village, Ravenswood, Uptown, Edgewater, Rogers Park, Norridge, Harwood Heights, Park Ridge, Skokie, Lincolnwood, Morton Grove, Evanston, Oak Park, Elmwood Park, River Forest, Forest Park, Berwyn, Cicero, Schiller Park, Franklin Park, Rosemont, and nearby areas.
Related Services
- Fence and Gate Repair in Chicago
- Handyman Services in Chicago
- Carpentry Handyman in Chicago
- Door Repair and Installation in Chicago
- Property Maintenance Handyman Services in Chicago
- Painting and Touch-Up Repair in Chicago
- Contact EVO Home Repair
Frequently Asked Questions
Do you repair metal gates in Chicago?
Yes. EVO Home Repair handles suitable metal gate repairs, including latch repair, hinge adjustment, small welding repairs, lock-area reinforcement, closer replacement, and hardware replacement. Severe corrosion, structural post failure, powered gates, or code-sensitive gates may need specialist review.
Can you repair a gate that will not close?
Yes. A gate that will not close may need hinge adjustment, latch alignment, closer replacement, spring hardware repair, frame repair, or post correction. Photos of the hinge side, latch side, and bottom clearance help identify the likely cause.
Do you install or replace gate closers?
Yes. We can install and replace suitable gate closers, spring closers, and related brackets. For pool areas, child-safety areas, HOAs, and commercial properties, code or association rules may apply, and we do not claim inspection or pool-barrier code approval.
Can you repair wood fence gates?
Yes. Wood gate repair may include rebuilding the frame, adding a proper diagonal brace, replacing damaged boards, replacing hinges, adjusting the latch, trimming the gate, or building a new gate panel for the existing opening.
Do you repair gate locks and latches?
Yes. We handle basic gate lock and latch work, including latch replacement, lock alignment, strike adjustment, hardware replacement, and small metal reinforcement where suitable. Rekeying, lockout service, electronic access control, and intercom systems may require a locksmith or access-control specialist.
Do you repair garage doors?
We handle selected minor garage door maintenance, such as weather stripping, bottom seal replacement, trim repair, and small non-tension hardware issues where the scope is suitable. Garage door springs, cables, off-track doors, major opener issues, and high-tension parts should be handled by a garage door specialist.
What photos should I send for a gate repair estimate?
Send the full gate from both sides, hinge side, latch side, lock area, closer, spring, post connections, bottom clearance, and any broken welds, rust, wood damage, or sagging areas. For wood gates, include the back side of the frame and diagonal brace.
Send gate photos before scheduling
Include the gate, posts, hinges, latch, lock, closer, bottom clearance, and damaged area. For garage doors, send the bottom seal, opener arm, track area, and the issue you want checked.