Curved Back Panel TV: How to Mount TVs With Spacers

You buy a new TV and decide to mount it on the wall. But when you hold the mount bracket against the back of the TV, it does not sit flat. The back of the TV is curved — rounded at the edges and flat in the center — and the mount bracket leaves gaps at the corners. The VESA screws thread in, but the TV does not sit flush against the mount. You are not sure if it is safe to mount a TV with a curved back panel.

Curved back panels are common on modern TVs, especially mid-range and budget models. Manufacturers curve the back panel for aesthetic reasons, to reduce material usage, or to accommodate internal component layout. The curve creates a gap between the TV and a flat mount bracket, which can cause the VESA screws to not fully engage, put uneven stress on the mounting holes, and leave cables with nowhere to route. In Chicago, where wall space is at a premium in apartments and condos, mounting curved-back TVs correctly is essential.

Quick Answer: Can I Mount a TV With a Curved Back Panel?

Yes. Curved back panel TVs can be safely mounted using spacers (also called standoffs or extension washers) that fill the gap between the curved back and the flat mount bracket. The spacers ensure the VESA screws fully engage the TV threads and distribute the clamping force evenly. Most quality TV mounts include spacers, but you may need longer ones depending on the curve depth of your TV.

Why TVs Have Curved Back Panels

Aesthetic design. Many manufacturers curve the back panel to match a curved front bezel or to create a sleeker profile. This is common on Samsung, LG, and Sony models.

Internal component layout. The curve provides additional internal volume at the edges of the TV, where the power supply, logic board, and speakers are often located. A curved back allows these components to fit in a thinner overall profile.

Material cost reduction. A curved back panel uses slightly less material than a flat panel of the same dimensions. For budget manufacturers, this is a meaningful cost savings at scale.

Structural rigidity. A curved panel is structurally stronger than a flat panel of the same thickness. The curve resists bending and twisting, which protects the internal components during handling and transport.

Curve Depth and Mounting Impact

Shallow curve (5-10mm gap). The most common curve depth. Standard spacers included with most TV mounts (5mm to 10mm) will fill the gap. The TV will sit close to the mount with minimal gap.

Moderate curve (10-20mm gap). Found on some mid-range models. May require longer spacers (15mm to 20mm) that are not always included with the mount. You may need to purchase spacers separately.

Deep curve (20mm+ gap). Found on some budget models and older designs. Requires custom-length spacers or a mount specifically designed for curved-back TVs. The gap also creates challenges for cable routing, as cables cannot pass through the space between the TV and mount.

Spacers: The Solution for Curved Back Panels

What are spacers? Spacers are threaded metal cylinders that screw onto the VESA screw between the screw head and the TV back panel. They fill the gap created by the curved back, ensuring the screw fully engages the TV threads.

Spacer sizes. Spacers come in different lengths (5mm, 10mm, 15mm, 20mm) and thread sizes (M4, M6, M8). You need spacers that match both your VESA screw size and the gap depth created by your TV’s curve.

How to choose spacer length. Measure the gap between the TV back panel and the mount bracket at the corner (where the curve is deepest). Select spacers that are slightly shorter than this gap — the screw should compress the TV back panel slightly against the spacer for a secure fit.

Where to get spacers. Most quality TV mounts include a set of spacers in multiple lengths. If your mount does not include spacers or the included ones are too short, spacers can be purchased separately from hardware stores or online retailers.

Cable Routing With Curved Back TVs

Curved back panels create an additional challenge: cable routing. When the TV sits close to the mount (even with spacers), there is limited space for cables to pass between the TV and the mount bracket.

Plan cable paths before mounting. Route all cables through the mount bracket before attaching the TV. Most mounts have cable management channels or clips built into the bracket.

Use low-profile cable connectors. Right-angle HDMI connectors and low-profile cable adapters reduce the cable thickness, making it easier to route cables in tight spaces.

Leave slack for service access. Even with a curved back, leave enough cable slack to disconnect and reconnect cables if needed. Do not pull cables tight against the curve.

What Is Included in Professional TV Mounting

• TV back panel assessment — we measure the curve depth and determine the correct spacer length.
• Correct VESA screws and spacers — we bring spacers in multiple lengths to match your TV’s curve.
• Mount selection compatible with your TV’s VESA pattern, weight, and back panel design.
• Wall structure assessment and appropriate anchor selection.
• Complete installation, leveling, and cable management.
• Stability verification before you use the TV.

When TV Mounting Requires Specialized Help

• Deep curve (20mm+ gap). Requires custom-length spacers or a specialized mount. Professional assessment ensures the correct solution.
• Cable routing challenges. If your TV has many cables (HDMI, power, ethernet, antenna) and a deep curve, professional cable management ensures clean installation.
• Combination of curved back and non-standard VESA. Some curved-back TVs also use non-standard VESA patterns, compounding the mounting challenge.

Our TV Mounting Process

Step 1: TV and wall assessment.
We inspect your TV’s back panel — measuring the curve depth, VESA pattern, and screw size. We also assess the wall structure behind the mounting location.

Step 2: Mount and spacer selection.
Based on your TV’s curve depth, VESA pattern, and weight, we select a compatible mount and the correct spacer length. We verify cable clearance before finalizing the mount choice.

Step 3: Mount installation.
The mount is secured to the wall using anchors appropriate for your wall type. We verify the mount is level and solid before attaching the TV.

Step 4: TV mounting and cable management.
Spacers are installed on the VESA screws to fill the gap created by the curved back. Your TV is securely attached to the mount, all cables are routed and organized, and we perform a final stability check.

Pricing Factors

• TV size and weight. Larger, heavier TVs require heavier-duty mounts and hardware.
• Curve depth. Deeper curves may require longer or custom spacers, adding to material cost.
• Mount type. Fixed mounts are the most affordable. Tilting and full-motion mounts cost more and may have tighter cable clearance.
• Wall type. Standard drywall on wood studs is the most straightforward. Metal studs, plaster, brick, and concrete require specialized hardware.
• Cable management. Basic cable organization is included. In-wall cable concealment requires additional materials and labor.

FAQ: Curved Back Panel TV Mounting

Q: Is it safe to mount a TV with a curved back?
A: Yes, as long as you use the correct spacers to fill the gap between the curved back and the mount. Without spacers, the VESA screws may not fully engage, creating an insecure mount.

Q: My mount did not include spacers. Where can I get them?
A: Spacers are available at hardware stores (search for “M4/M6/M8 threaded spacers” or “VESA standoffs”) and online retailers. Make sure the spacer thread size matches your TV’s VESA screw size.

Q: Can I use washers instead of spacers?
A: Standard washers are not ideal. VESA spacers are threaded on both ends and designed to work with VESA screws. Washers can slip, shift, or not provide adequate clamping force.

Q: Does a curved back affect which mount I can use?
A: Most mounts work with curved-back TVs as long as spacers are used. However, full-motion mounts may have tighter cable clearance with curved-back TVs. A fixed or tilting mount is often the better choice.

Q: How much gap is normal between a curved-back TV and the mount?
A: With proper spacers, the gap should be minimal — the TV should sit close to the mount bracket with the spacers filling the curve. Any visible gap larger than 2-3mm at the VESA mounting points indicates the spacers are too short.

Q: How much does professional TV mounting cost?
A: TV mounting pricing depends on TV size, curve depth, mount type, wall type, and cable management needs. We bring spacers in multiple lengths — included in the service. Call (708) 475-2454 or message us on WhatsApp.

Mount Your Curved-Back TV Safely

A curved back panel does not prevent wall mounting — it just requires the right spacers. Before you install a TV mount on a curved-back TV, measure the curve depth and select spacers that fill the gap. If you are unsure, send us a photo of the back of your TV and we will help.

Related: VESA Screws Guide | VESA Screws Too Long | TV Ports Blocked by Mount